Clipsnap Quad 10mm + 5mm

  • Allows a continuous overflow gap between back of gutter and fascia.
  • Available in 5mm or 10mm.
  • Made with Nylon 6, completely non-corrosive and can be used with most types of metal gutter systems in any climate.
  • Simple to install and user friendly with no sharp edges.
  • Product Patent and Trademark of Australia.

Category:

Product Description

  • Allows a continuous overflow gap between back of gutter and fascia.
  • Available in 5mm or 10mm.
  • Made with Nylon 6, completely non-corrosive and can be used with most types of metal gutter systems in any climate.
  • Simple to install and user friendly with no sharp edges.
  • Product Patent and Trademark of Australia.

Product Brochure

Material Data Sheet

Category:

Installation

1. Push clip over fascia 100mm from corner and then space them up to 1 meter centres.

2. Once clips are installed push gutter up into clips as shown and allow for the fall of the gutter by adjusting the gutter in the clips teeth.

3. Hook arm into the bead of the gutter as shown, rotate and slide into the rail at the front of the clip.

4. Repeat this process until all arms have been installed.