Gutter Clip

Allows a 5mm + 10mm continuous overflow gap between back of gutter and fascia.
Modular product can be used on most types of gutter profiles and metal/timber fascia fixing.
To be used with Interline Arm Attachment.
Made with Nylon 6, completely non-corrosive and long lasting UV protection. Withstands the most extreme environments.
Trademark of Australia.

Category: CLIPSNAP

Product Description

Allows a 5mm + 10mm continuous overflow gap between back of gutter and fascia.
Modular product can be used on most types of gutter profiles and metal/timber fascia fixing.
To be used with Interline Arm Attachment.
Made with Nylon 6, completely non-corrosive and long lasting UV protection. Withstands the most extreme environments.
Trademark of Australia.

Category: CLIPSNAP

1. Push clip over fascia 100mm from corner and then space them up to 1 meter centres.

2. Once clips are installed push gutter up into clips as shown and allow for the fall of the gutter by adjusting the gutter in the clips teeth.

3. Hook arm into the bead of the gutter as shown, rotate and slide into the rail at the front of the clip.

4. Repeat this process until all arms have been installed.

Previous Product Insulated Patios

Next Product Spring Clip Arm Attachment